lab07 : Array lists and dynamic arrays

num	ready?	description	assigned	due
lab07	true	Array lists and dynamic arrays	Fri 11/12 02:00PM	Wed 11/24 04:59PM

What to work on in lab on 11/17/21

If you aren’t finished with lab06, work on that first.
In parallel with that, finish up any remaining work in zyBooks chapter 10; that was due last Friday, but is still accepted through next Friday
Then, work on this lab, lab07. You may find that Chapters 8 and 10 in the zyBook helpful.
Once you completed lab07, if there remains any unfinished work in the zyBook from chapters 11 and 12, work on that. That will help you get ready for the next lab.

Goals of this lab

The goal of this lab is get more practice with iterating through arrays and dynamically allocating memory. Continue to practice code tracing to reason about your code. We request that you DO NOT ask the staff to debug your code. They have been specifically instructed not to debug for you, rather to guide in the process.

Step by Step Instructions

Step 1: Getting Ready

Go to github and find a repo for lab07 assigned to your GitHub id.
Log on to your CSIL account.
Change into your ~/cs16 directory
Clone your empty lab06 repo into your ~/cs16 directory.
In your empty repo, do git checkout -b main to establish that you are on the main branch as your default branch.

Step 2: Obtain the starter code

The starter code is in this repo:

https://github.com/ucsb-cs16-f21/STARTER-lab07

The URL for cloning this repo is this: git@github.com:ucsb-cs16-f21/STARTER-lab07.git

Previous labs contain instruction for the process of:

Adding a starter remote for this repo
Pulling the code from that starter remote into your own repo.

Please do those steps now, and then do a git push origin main to populate your own repo with the starter code.

If you need help with these steps:

First consult previous labs for more detailed instructions.
Then, if you are still having trouble, ask the staff for help during discussion section or office hours.

Once you’ve populated your repo, typing the ls command should show you the following files in your current directory

$ ls
Makefile		arrayFuncs.h		moreArrayFuncs.h
README.md		mafTest.cpp		tddFuncs.cpp
arrayFuncs.cpp		moreArrayFuncs.cpp	tddFuncs.h
$ 

Step 3: Reviewing the files and what your tasks are

Here is a list of your tasks for this lab:

Step 3a: Familiarize yourself with the big picture

Type “make tests” and you will see some tests pass, but some fail.

You are finished when all the tests pass.

There is only one file that you need to edit this week:

moreArrayFuncs.cpp contains more functions that deal with arrays. These are in addition to the arrayFuncs.cpp that you worked with before in lab04.

Step 3b: Work on the array functions

There are 9 functions you will need to write for this lab:

indexOfMax
indexOfMin
largestValue
smallestValue
sum
copyElements
copyOddOnly
multiplyPairwise
createArray

Each one has a set of tests which can be found under its corresponding heading when you type make tests. For example, the indexOfMax tests look like this to start:

--------------INDEX_OF_MAX--------------
   FAILED: indexOfMax(fiveThrees,5)
     Expected: 0 Actual: -42
   FAILED: indexOfMax(zeros,3)
     Expected: 0 Actual: -42
   FAILED: indexOfMax(primes,1)
     Expected: 0 Actual: -42
   FAILED: indexOfMax(primes,5)
     Expected: 4 Actual: -42
   FAILED: indexOfMax(primes,10)
     Expected: 9 Actual: -42
   FAILED: indexOfMax(meaning,1)
     Expected: 0 Actual: -42
   FAILED: indexOfMax(mix1,10)
     Expected: 5 Actual: -42
   FAILED: indexOfMax(mix2,10)
     Expected: 5 Actual: -42
   FAILED: indexOfMax(mix1,3)
     Expected: 1 Actual: -42
   FAILED: indexOfMax(mix2,3)
     Expected: 1 Actual: -42
   FAILED: indexOfMax(mix2,1)
     Expected: 0 Actual: -42
   FAILED: indexOfMax(mix2,5)
     Expected: 4 Actual: -42

You should replace each function stub with the correct code for the function until all of the tests for each one pass. It is recommended that you work on the functions one at a time in the order that they are presented above. That is, get all the tests to pass for indexOfMax then indexOfMin and so on. When all the tests pass, move on to the next step.

Step 4: Checking your work before submitting

When you are finished, you should be able to type make clean and then make tests and see the following output:

-bash-4.2$ make clean
/bin/rm -f mafTest *.o
-bash-4.2$ make tests
clang++ -Wall -Wno-uninitialized   -c -o mafTest.o mafTest.cpp
clang++ -Wall -Wno-uninitialized   -c -o moreArrayFuncs.o moreArrayFuncs.cpp
clang++ -Wall -Wno-uninitialized   -c -o tddFuncs.o tddFuncs.cpp
clang++ -Wall -Wno-uninitialized   -c -o arrayFuncs.o arrayFuncs.cpp
clang++ -Wall -Wno-uninitialized  mafTest.o moreArrayFuncs.o tddFuncs.o arrayFuncs.o -o mafTest
./mafTest
--------------INITIALIZING--------------
PASSED: arrayToString(fiveThrees,5)
PASSED: arrayToString(zeros,3)
PASSED: arrayToString(empty,0)
PASSED: arrayToString(primes,5)
PASSED: arrayToString(primes,10)
PASSED: arrayToString(meaning,1)
PASSED: arrayToString(mix1,10)
PASSED: arrayToString(mix2,10)
PASSED: arrayToString(descending,5)
--------------INDEX_OF_MAX--------------
PASSED: indexOfMax(fiveThrees,5)
PASSED: indexOfMax(zeros,3)
PASSED: indexOfMax(primes,1)
PASSED: indexOfMax(primes,5)
PASSED: indexOfMax(primes,10)
PASSED: indexOfMax(meaning,1)
PASSED: indexOfMax(mix1,10)
PASSED: indexOfMax(mix2,10)
PASSED: indexOfMax(mix1,3)
PASSED: indexOfMax(mix2,3)
PASSED: indexOfMax(mix2,1)
PASSED: indexOfMax(mix2,5)
--------------INDEX_OF_MIN--------------
PASSED: indexOfMin(fiveThrees,5)
PASSED: indexOfMin(zeros,3)
PASSED: indexOfMin(primes,5)
PASSED: indexOfMin(primes,10)
PASSED: indexOfMin(meaning,1)
PASSED: indexOfMin(mix1,10)
PASSED: indexOfMin(mix2,10)
PASSED: indexOfMin(mix1,3)
PASSED: indexOfMin(mix2,3)
PASSED: indexOfMin(descending,5)
PASSED: indexOfMin(descending,1)
--------------LARGEST_VALUE--------------
PASSED: largestValue(fiveThrees,5)
PASSED: largestValue(zeros,3)
PASSED: largestValue(primes,5)
PASSED: largestValue(primes,10)
PASSED: largestValue(meaning,1)
PASSED: largestValue(mix1,10)
PASSED: largestValue(mix2,10)
PASSED: largestValue(mix1,3)
PASSED: largestValue(mix2,3)
PASSED: largestValue(descending,5)
PASSED: largestValue(descending,1)
--------------SMALLEST_VALUE--------------
PASSED: smallestValue(fiveThrees,5)
PASSED: smallestValue(zeros,3)
PASSED: smallestValue(primes,5)
PASSED: smallestValue(primes,10)
PASSED: smallestValue(meaning,1)
PASSED: smallestValue(mix1,10)
PASSED: smallestValue(mix2,10)
PASSED: smallestValue(mix1,3)
PASSED: smallestValue(mix2,3)
PASSED: smallestValue(descending,5)
PASSED: smallestValue(descending,1)
--------------SUM--------------
PASSED: sum(fiveThrees,5)
PASSED: sum(zeros,3)
PASSED: sum(primes,5)
PASSED: sum(primes,10)
PASSED: sum(meaning,1)
PASSED: sum(mix1,10)
PASSED: sum(mix2,10)
PASSED: sum(mix1,3)
PASSED: sum(mix2,3)
PASSED: sum(descending,5)
PASSED: sum(descending,1)
--------------COPY_ELEMENTS--------------
PASSED: arrayToString(primes,10)
PASSED: arrayToString(mix1,10)
PASSED: arrayToString(mix1,10)
PASSED: arrayToString(mix2,10)
PASSED: arrayToString(mix1,10)
PASSED: arrayToString(mix2,10)
--------------COPY_ODD_ONLY--------------
PASSED: copyOddOnly(a,descending,5)
PASSED: arrayToString(descending,5)
PASSED: arrayToString(a,3)
PASSED: copyOddOnly(a,mix2,10)
PASSED: arrayToString(mix2,10)
PASSED: arrayToString(a,5)
--------------MULTIPLY_PAIRWISE--------------
PASSED: arrayToString(fiveThrees,5)
PASSED: arrayToString(descending,5)
PASSED: arrayToString(a,5)
PASSED: arrayToString(primes,5)
PASSED: arrayToString(descending,5)
PASSED: arrayToString(a,4)
PASSED: arrayToString(primes,7)
PASSED: arrayToString(a,7)
--------------CREATE_ARRAY--------------
PASSED: arrayToString(oneElem, 1)
PASSED: arrayToString(threeElems, 3)
PASSED: arrayToString(fiveElems, 5)
PASSED: arrayToString(oneElem, 1)
PASSED: arrayToString(threeElems, 3)
PASSED: arrayToString(fiveElems, 5)
-bash-4.2$

At that point, you are ready to try submitting on gradescope.

Step 5: Turn in your code on Gradescope

Submit all the .cpp and .h files to this assignment on Gradescope via your github repo. Then visit Gradescope and check that you have a correct score.

You must check that you have followed these style guidelines:

Indentation is neat, consistent and follows good practice (see below)
Variable name choice: variables should have sensible names. More on indentation: Your code should be indented neatly. Code that is inside braces should be indented, and code that is at the same “level” of nesting inside braces should be indented in a consistent way. Follow the examples from lecture, the sample code, and from the textbook.

Commit and push the latest version of your code on github

An important word about academic honesty and the gradescope system

We will test your code against other data files too—not just these. So while you might be able to pass the tests on gradescope now by just doing a hard-coded “cout” of the expected output, that will NOT receive credit.

To be very clear, code like this will pass on gradescope, BUT REPRESENTS A FORM OF ACADEMIC DISHONESTY since it is an attempt to just “game the system”, i.e. to get the tests to pass without really solving the problem.

I would hope this would be obvious, but I have to say it so that there is no ambiguity: hard coding your output is a form of cheating, i.e. a form of “academic dishonesty”. Submitting a program of this kind would be subject not only to a reduced grade, but to possible disciplinary penalties. If there is any doubt about this fact, please ask your TA and/or your instructor for clarification.